30 years of experience with CEA

• Seismometers:  for 30 years

• Microbarometers:  for 20 years

Microbarometer digital MB3d | per 1 | 12,865
Weight and Dimensions: 	H 25 cm / Diam. 11 cm / Weight 3.4 Kg Transducer block + Digital hood | per 2 | 12,750
| per 3 | 12,620
| per 4 | 12,500
| from 5 to 9 | 12,350
| from 10 to 19 | 11,835

Microbarometer analog MB3a | per 1 | 9,260
Weight and Dimensions 	H 13.6 cm /  Diam. 11 cm / Weight 3.0 Kg Transducer block + Analog hood | per 2 | 9,160
| per 3 | 9,060
| per 4 | 8,950
| from 5 to 9 | 8,850
| from 10 to 19 | 8,230

PACK-TUB-FOAM | ScrewPack with foam | Plastic tube packaging | 130
PELI1430_1S | PELICASE 1430 1 sensor | PELICASE 1430  + adapted foam / Dim. int : 344 x 146 x 297 mm / Dim. ext : 430 x 244 x 341 mm | 650
TMG-DET-3-73 | PELICASE 1650 6 sensors | PELICASE 1650  + adapted foam  / Int Dim : L725 x W445 x D270 mm  / Ext Dim : L802 x W520 x D316 mm | 1,250

MB3a

€6990ex-VAT ex-works

from

for 30 units

order now

Tel. : +33 (0)2 96 46 16 11
marketing@seismowave.com

seismowave.com

Services

After sales assistance
hotline warranty

metrology  (using IS calibrator©)

maintenance

ask for a quotation

Digital Starter kit

Sofware

DIONISOS-MU-001 | Dionisos Sofware V1.03 | It enables monitoring, parameter set-up, data transfer, real-time acquisition and signal processing | 695

• MB3d
• 12V power cable 3m
• Signal cable 1.5m
• GPS antenna  with right angle adapter
• 12V battery
• Magnet wrench
• Dionisos software
• User guide
• Transport case

manual

TUG | Technical User Guide | Paper Book edition | 60
UMD | Dionisos User Manual | Paper Book edition | 70

CABLES

PR000187–CBL_3 | 12 V Power cable | RSN801 - 3 pin connector to fast on 3 m long | 232
PR000183–CBL_5 | GPS cable 5 m | RSN279 - Coaxial TNC to TNC 5 m long | 150
PR000183–CBL_10 | GPS cable 10m | RSN279 - Coaxial TNC to TNC 10 m long | 170
PR000188-CBL_1.5 | PC/USB cable 1,5 m | RSN819 - 18 pin to USB 1.5 m long | 245
PR000187–CBL_3 | PC/USB cable 3 m | RSN819 - 18 pin to USB 3 m long | 260
PR000161-CBL_3 | Sensor to digitizer cable | RSN804 - 18 pin to not wired 3 m long | 260

save €850*

TOOLS

PR0000826-CBL | Magnet Adjustment Cable | 18 pin connector to banana plugs. To connect between the analog module and a multimeter in order to adjust the magnet postion. | 150
MU000384 | Magnet Wrench | Wrench designed to adjust the position of the magnet | 55

ACCESSORIES

ANT_PROC_2000B | GPS ANTENNA PROCOM 2000B TNC | Built-in high gain, low noise amplifier / Right-hand circular polarization (RHCP) / 3 V / TNC / EMC tested | 110
PE9560 | Right Angle Adapter | Right angle adaptator for GPS antenna TNC Male to TNC Male | 90
BAT_YUASA 12V12AH | BATTERY NP12-12 YUASA | 12Ah  / 12V / Lead Acid / 97.5 X 98 X 151mm / 4kg / Max: 3A | 110

€15,050

€ 14,200 ex-VAT ex-works

Prices in euro tax free ex-works valid december 31th 2015 exept special offers. Non contractual photos and prices

* special offer valid from april  until june 30th 2015